Research Hub

대학 자원

대학 인프라와 자원을 공유해 공동 연구와 기술 활용을 지원합니다.

공동활용 연구장비

20140819000000176739.jpg

분무건조기

상담·문의하기

Spray Dryer

  • 모델명 SD-1000
  • 제조사 Tokyo Rikakikai
  • 장비용도 생산
  • 장비구분 기계가공/시험장비 > 열유체장비 > 건조기

상세정보

구축일자 2014-08-04
납품업체 Tokyo Rikakikai
위치 광주광역시 북구 첨단과기로208번길 43-26 전남대학교 첨단캠퍼스 마이크로의료로봇센터 별관 F2층 204
구성및성능 1. Spray Dryer MODEL : SD-1000
* Type : 2 way nozzle type Spray nozzle
* Drying Capacity : Max. about 1500ml/h
* Temp. Range : 40 ～ 200℃ ( Temp. at inlet )
* Temp. Accuracy : ± 1℃
* Dried Air Volume Range : 0.2 ～ 0.75m3/min.
* Spray Air Pressure Range : 20 ～ 245kPa ( 0.2 ～ 2.5kg/cm2 )
* Feed Pump Volume Range : 150 ～ 1700ml/h
* Sample Stirrer rpm / capacity : 100~1000rpm / 50ml~2L (water)
* Safety Device : Cover for drying tubeSelf-diagnostic device (Temp. error Air flow error Damaged heater Flow pressure error)
* Sprayed Air Line Cleaning Device : Automatic by interval timer
* Additional Function : Sprayed air line valve ON-OFF switch
* Heater : 3 KW * Spray Nozzle : 2 way nozzle ( ID 0.71mm )
* Air pump for Spray : Air compressor for spray ( optional )
* Drying Tube : Hard glass
* Cyclone Tube : Hard glass
* Powder Collecting Container : Hard glass ( 600ml )
* Stirrer for Sample : DC brushless motor 6W Cobalt magnet
* Dimension of Tubing : ID 3.15mm ?OD 5.2mm
* Interval Timer : OFF
장비안내 Drying time is short as to avoid affect from high temperature on samples.
Sample solvents can be collected in the form of dried uniform powder. Pre-process of filtering or concentrating or post-process of grinding are not required.
Drying by gram order is possible.
Equipped recorder output enables setting checking and recording the experiment data.
Automatic cleaning of the nozzle part of air spray line by timer is possible. Powders sticked inside nozzle can be removed by pusshing needle a few times.
Magnetic stirrer is equipped as standard.
Dried air inlet/outlet filters are equipped as standard.

목록보기